Share this:
Air Distributor for SKR v1.3 CPU Stepper Motor Drivers. It is designed to be used with a 50x50x10mm fan. We recommend using a low noise one.
It is not subject to the circuit. Double-sided tape should be used on the base that supports the fan, and it is very attached. Optionally, it can be fastened using a sheet metal screw that holds it underneath, if your printer has a hole in the area where it is located, or it specifically makes one.
The refrigerator has the 6.6mm that the CPU should have, if it is held with a 5mm column. So if it is so, it will be at the same height that can be seen in the images.
The file for Fusion360 is attached, in case you want to modify it, as well as the Simplify3D Slicer file with the print settings.
We recommend printing at 0.2mm layer height, in vertical position, without supports.
I hope you find it useful.
Thanks for your attention.
This article was first featured at https://ift.tt/3cJSaVb on April 22, 2020 at 07:34AM by massana73
More Stories
Can this possibly be true? “Metal 3D printing is now possible on any 3D printer…with the right settings and a few minor upgrades like a hardened steel nozzle…” – July 2 2023 at 04:59PM
New NASA Funding Ignites 25 3D Printing Projects in Space Exploration – June 18 2023 at 04:34PM
Nvidia AI produces 3D models from 2D videos 3D printing applications forthcoming? – June 15 2023 at 02:55AM