Cotton Filter Mask (COVID19/SARS2)

Simple mask with 2 parts (body and cap) and you can use any filter you want, most recommended to use facial discs, they are cheap and you can discard them easily. In any case you can use the filter you want but probably you will have to cut the filters to this shape, so this is not needed with facial discs as the shape is already designed to support them, just keep in mind that the diameter should be as specified below.

STATUS: Mk1 (First release)

HIGHLIGHTS:
Filter material: Cotton (100%)
Filter shape: Disc
Filter size: Ø 52-60mm
Filter possible source: Beauty stores and supermarkers
Number of component: 3 (filter included)
Connection type: Threaded
Weight: 20 g
Total printing time: About 5 hours using recommended quality (0.15mm).

IMPORTANT NOTES

1) Please discard the disc after each use

2) Do not try to sterilize the mask with temperature, it will damage it.

3) To clean the mask use water with soap or soft house disinfectants, then clean with water and let it dry.

4) Every new user of the mask should verify the air tightness of the mask with the face, to do this proceed as follows: i) Put on the mask; ii) Place your hand palm on the filter grid; iii) Blow and check if if there is any air leak between your face and the mask; iv) If no big leak is detected then mask if OK for that person, if not check with