Skid Loader mini RC

It is a cute mini loader designed using 3d printing and Arduino coding, and it is made with perfect design and sophisticated design technology.

Project effectiveness

• You can make a 3D printed RC toy with small but detailed completeness.
• Experience basic knowledge of hardware and Arduino.
• Designed as Fusion 360.
  
    (I follow the design process and help to learn 3D modeling)

Main function

• Wi-Fi control (lighting, moving)
• 2 Way bucket control
• Applied replacement battery

Board

• We made the board ourselves.
• It’s built on Aduino and is designed with the best features and sizes for loader controls.

Coding

• The coding source is on our blog.
  https://blog.naver.com/3dfuns/221422750620

Printing

• It is important to set the floor surface for some parts.
  
  (Please refer to the attached image for floor setting)
• It is recommended to find and apply setting values that can be stably printed and removed(Some parts need to be trimmed or glued after printing)
• Print large parts one at a time.
• The gear needs two sets.

Assembly

• It is a compact size and can be difficult to assemble boards and wires. It will be helpful to refer to the YouTube channel’s assembly video.

Patience and persistence. And keep in mind that the degree of devotion can influence quality. ^^

More videos can be found on the YouTube channel or on our blog.

youtube:

  https://www.youtube.com/watch?v=utB9Z3dmve8

blog
https://blog.naver.com/3dfuns/221406762117