fbpx
March 16, 2025

Tinker Together Word Perspective Illusion

large_preview_Small_3D_Word_Illusion.png

I wanted to make a word illusion where when you look from one side it says one word and when you look from another side it says another word. I did this with TINKER and TOGETHER but I also did a tutorial explaining how to do this yourself with whatever word combination you want.
https://www.instructables.com/id/3D-Word-Illusion/

I also made a very simple video showing the process: https://www.youtube.com/watch?v=uYYQNOSRvjc

As for printing, these can be a PAIN to print because of support. I recommend, if you are going to print it, print with water soluble filament as support and if you can’t to print it small so it can handle the overhangs without support. The large one you see I did with water soluble support and the small one I printed so it was only about 1.5″ by 1″.

If your design has no overhangs, you should be fine to print in any size.

This article was first featured at https://ift.tt/2JE5kGs on April 3, 2020 at 02:36PM by PenolopyBulnick

%d bloggers like this: