3dverkstan 25min visor frame EU version UPDATED

This desing was downloaded from https://3dverkstan.se/protective-visor/ and i modified two things 1. remove middle part to make a hole 2.add thickness to bridge .

This helps to easy print big stack of frames in the short time without losing quality or flexibility !!

HOW to stack frames – 1.ADD 2 or mora frames 2. set X and Y to 0 3.height of model is 5mm. so the Z height of your second model is 5mm+LAYER HEIGHT !!

TIP FOR 20-25 min print time per frame:

NOZZLE – 0.8

Layer height – 0.5 or 0.6

Walls-3!

Set seam to FRONT

Skin over lap to 20%

Inner walls flow to 110%

Speed – 80mm/s (this only affects walls)

Print temperature – your print temperature for pla +10c

SEE POST PRINTING PART and GL STAY SAFE!!!!