Mini Dual Extruder

Hello, dear Makers and 3D Printing Enthusiasts!

The Mini Dual Extruder has proven to be a very reliable concept. On my Easy CoreXY 3D Printer .

is this extruder concept used and after over 2000 hours of printing it still works like in the first day.

What is different from the other ‘’Mini Dual Extruders’’ designs:

•The bracket is integrated part of extruder housing and the interface is the standard one

•Hotend wiring is fixated inside the housing

•Easy to print

For 1/16 Microstepping setup and 1.8° per step motor, are needed 130steps/mm

Staff needed in order to build it:

1) Extruder gears set:

-from Blurolls: https://ali.ski/ONAeIu
2) Thumb Screw:

-from Blurolls: https://ali.ski/rLaIXk
3) Pneumatic Connector:

-from Blurolls: https://ali.ski/DHLTQ
4) E3D V6 Hotend:

-from Blurolls: https://ali.ski/mLGJ9

-from TriangleLab (a): https://ali.ski/f3N5nS

-from TriangleLab (b): https://ali.ski/M5LY_

-from Mellow (a): https://ali.ski/ZvRyg4

-from Mellow (b): https://ali.ski/mT8Zvr
5) Brass inserts:

-from Amazon (Ruthex): https://amzn.to/3adXlva

-from Aliexpress: https://ali.ski/0MEd4
6) DIN912 Screws:

-from Aliexpress: https://ali.ski/PU38sy
7) Nema17 x 34mm:

-Stepperonline: https://amzn.to/2wY7QEA
8) Filament:

-from Amazon: https://amzn.to/32CE8Az

Updates and improvements may come and I will keep track of them here:

1 – 29/02/2020 – First Release of the project

* only the files corresponding to the last state of development will be published. If of any reason you may need an older version, simply write me an email at corexy.diy@gmail.com

You don’t have to, but any donation would be very appreciated.

ENJOY!