Share this:
The case was designed to be fully 3d printed. Honeycomb pattern is added to reduce weight and filament usage, improve rigidity and help airflow.
The RD6006 module snaps in place with four side clips. Inside the unit there is place to mount MeanWell LRS-150 power supply sideways (for example 150-36V), standard IEC C14 3 Pin Chassis Panel Mount Plug and 240V Rocker Switch.
3d printed sleeves are added to keep wires from being exposed, but it is good to add heat-shrink tubing.
To ensure proper airflow you need to glue >0.5cm feet to the bottom of the unit. Consider mounting low noise dc-fan at the top of the power supply.
Printing time : 10 hours 0.3mm layer height.
Supports: only for IEC connector (above printbed).
This article was first featured at https://ift.tt/31BB7jx on February 6, 2020 at 04:21PM by mathmed
More Stories
Can this possibly be true? “Metal 3D printing is now possible on any 3D printer…with the right settings and a few minor upgrades like a hardened steel nozzle…” – July 2 2023 at 04:59PM
New NASA Funding Ignites 25 3D Printing Projects in Space Exploration – June 18 2023 at 04:34PM
Nvidia AI produces 3D models from 2D videos 3D printing applications forthcoming? – June 15 2023 at 02:55AM