Share this:
Yet another minimal case for a Orange Pi Zero. This case has two additional buttons which could be used for controlling something on the Orange Pi (for e.g. shutdown/reboot).
The case itself tightly fits on around the board, so you might need to trim the 3D printing settings. As I have printed it with ABS, I had to print it with a scale of 100.5 %. In such way ABS shrinkage was taken into account.
Print settings: black ABS, 0.2mm layer height, 40% infill, 0.4mm nozzle diameter. There might be some problems with bigger nozzle, as there are some thin walls, but by tweaking the printer’s settings you should be fine with more or less any 3D printer.
===================================================================
More information about the case and were I personally have used it (and how to use the buttons), could be found at my blog: https://daumemo.com/orangepi-zero-power-reset-pushbuttons-and-a-3d-printed-case-part-2/
===================================================================
This article was first featured at https://ift.tt/36fHs4M on January 21, 2020 at 02:04PM by daumemo
More Stories
Can this possibly be true? “Metal 3D printing is now possible on any 3D printer…with the right settings and a few minor upgrades like a hardened steel nozzle…” – July 2 2023 at 04:59PM
New NASA Funding Ignites 25 3D Printing Projects in Space Exploration – June 18 2023 at 04:34PM
Nvidia AI produces 3D models from 2D videos 3D printing applications forthcoming? – June 15 2023 at 02:55AM