Looping Louie 120° Adapters for 3 players (Tuning set)

With this unique tuning set you can use your standard Looping Louie set to play a fair threesome when a fourth person is not available. The Adapters (short & long) place the catapult arms around the center item in an angle of 120° to each other with the exact same radius to the center point (resp. Louie’s rotation axis) like a regular mounted catapult. The Adapters are as easily mounted as like the original catapult arms. You just have to mention the correct orientation of the various Adapters to the switch of the center item (see pictures).

I guarantee that these items are 100% made on my own and that this is definitely NOT a scan or copy!

Thanks for downloading and have fun while printing and playing!

In general use your own favourite settings according to your material, nozzle diameter, layer height, etc. to get the print in a quality level you want to achieve.

Here it was:

Printer: Creality CR-10 (most simple and cheapest standard printer)

Nozzle diameter: 0.5mm

Layer height: 0.15mm

Material: PLA (M4P) with 215°C, Bed 45°C, Fan 100%

Printing speed / time: S3D defaults with +25% / ca. 2h

Hint: choose appropriate support in the overhanging areas (female connector) to get a nice fit of the parts at the end

This article was first featured at https://cults3d.com/en/3d-model/game/looping-louie-120-adapters-for-3-players-tuning-set on January 5, 2021 at 08:52AM by