3D Honeycomb Infill concept

0

0

A friend and I recognized the limits of current infill patterns and decided to design our own. Knowing that a hexagonal structure uses the least material to create a lattice of cells within a given volume, we let our design take inspiration from the way that bee’s nests intersect two opposing honeycomb layers into each other.

This model is, of course, only a concept and is not intended to be used for anything other than looking at.

I also added a single comb cell stl file so you can see exactly what the shape removed looked like.

You can read more about printing with Z-dependent structures here: http://engineerdog.com/2015/03/08/3d-printing-a-3d-honeycomb-infill-concept/

Obviously it is sub-optimal to try to print one infill design using another, so I would say this is a very difficult print.

This MUST be printed at 100% infill, I had luck with concentric pattern. I also turned off my retract setting.

This article was first featured at https://cults3d.com/en/3d-model/tool/3d-honeycomb-infill-concept on October 14, 2020 at 08:02AM by

John Jason Fallows

See author's posts