3D Printable Pipe Shelving Bracket!

So we needed to design a shelving system for all of our Harbor Freight parts boxes and we didn’t want to do the wood thing everyone and their brother does on You Tube so we came up with something a little more unique then that and created brackets which use common pipes to create low cost shelving! The uploaded model here is for 1/2 galvanized electrical conduit which we got at Menards. The opening (hole) size is 18.5mm with a padding or wall thickness of 7mm and screw holes which are 5mm (we used #8
hex head metal screws 1/2 inches long). We have also included the Fusion 360 so you can change all of these parameters as the design is parametric.

Note 1: The endcaps in the picture where created in Open-SCAD and you can find out more here as well as get the code: https://openscad.diy3dtech.com/openscad-designing-a-pressure-fit-endcap/

Note 2: The compresion fitted encaps where created in Open-SCAD and you can find out more here as well as get the code: https://openscad.diy3dtech.com/openscad-designing-a-compression-cover/

Don’t forget our YouTube channel here: http://YouTube.DIY3DTech.com as if you want to see what we are up to daily which you do right? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog or follow us on Instagram at https://www.instagram.com/diy3dtech/ well read our posts on tumlr here https://www.tumblr.com/blog/diy3dtech

Major Favor: if you make one of these please post the Make and share it with the community 🙂 .

Also, **please follow us on Thingiverse and give this a like if this came in handy **and for more information on this project, please visit us at http://www.DIY3DTech.com as well as subscribe to our YouTube Channel at http://YouTube.DIY3DTech.com along with a visit to our drone site and YouTube channel at http://video-drone.DIY3DTech.com

If you are looking for one of a kind swag shop for yourself or a Maker Geek friend, visit our swag shop at http://Swag.DIY3DTech.com for unique 3D Printing, Laser Cutting and CNC swag! Too, if you want a behind the scene look at what we are working on be sure to follow us on Instagram (https://www.instagram.com/diy3dtech/)!

This article was first featured at https://cults3d.com/en/3d-model/home/3d-printable-pipe-shelving-bracket on July 13, 2020 at 09:46PM by