RC Airboat conversion kit

0

0

This is 3D printed Airboat conversion kit. It is basically one part that you can easily mount on diffrent platforms or boats and give them ability to move like an airboat.I tried this on 4 diffrent builds and it works very good.

I included .f3d files so feel free to edit.

Parts I used:

Brushless motor- https://pl.aliexpress.com/item/32692656171.html?spm=a2g0o.productlist.0.0.5be57b93kD6VWH&algo_pvid=6165671f-a69f-42c4-8d30-f3e32e3a38ff&algo_expid=6165671f-a69f-42c4-8d30-f3e32e3a38ff-0&btsid=0b0a3f8115944037991094303ebda5&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

Esc- https://pl.aliexpress.com/item/32935322271.html?spm=a2g0o.productlist.0.0.405a27e5gqa00x&algo_pvid=ebc9845f-af64-4a34-b3de-4f0598388185&algo_expid=ebc9845f-af64-4a34-b3de-4f0598388185-0&btsid=0b0a187b15944040250532974e0bbc&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

5 inch propeller

Bec 5V

Rc Receiver and Transmitter

LiPo 3S 1300mah

9g servo

Some screws and wires

I will soon upload Instructable and Youtube video containing instructions and recordings of boats tests

I used Pla 15-20% infill. Supports are needed for Rudders. When printing stabilizers keep the infill at 2-5% and make sure there will be no holes in surface(4-5 slow top layers)

This article was first featured at https://cults3d.com/en/3d-model/gadget/rc-airboat-conversion-kit on July 12, 2020 at 12:33AM by

John Jason Fallows

See author's posts