fbpx
December 27, 2024

Seraphim: Rotundas

seraphim-rotundas

5 unique rotundas for 3d printing. These models were some of the most highly requested from our seraphim development.

The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.

This expansion set includes multiple indoor/outdoor rotundas in the Seraphim style.

TERRAIN RECOMMENDED PRINT SETTINGS

-Layer Size​: 0.15mm minimum. 0.1mm recommended.

-Infill​: 10% for all models recommended

-Top/Bottom Layers​: 9 (or 0.9mm if using a different layer size than 0.1mm)

-Side Shell Count​: 2 (or 0.8mm if using a different nozzle size than 0.4mm)

-Raft/Brim/Supports​: None

This article was first featured at https://cults3d.com/en/3d-model/game/seraphim-rotundas on July 18, 2021 at 12:33PM by

%d bloggers like this: