Proton Beam Effect Parts for Transformers x Ghostbusters Ectotron

0

0

To top off the various addons for Ectotron, here’s a set of proton-beam effect parts which can go onto the barrel of the proton wand!

For one of the parts, there is an additional option of extending from the tip of the beam with a provided wrap effect which can snugly go around Slimer! A stand of some sort will be needed to support Slimer’s weight though.

This set comes with 3 different beam effect parts, with an additional “wrap” effect designed to go snugly around Slimer and connect to the end of the Effect-C part. Each effect comes with a 3mm port to allow it to attach top the end of the proton wand.

To provide for a translucent effect, these parts can be first printed in clear and then painted lightly with a thin coat of orange and blue for the main beam and surrounding beams respectively:

Have fun 3d printing this set of effect parts for Ectotron or other figures with compatible accessories too! =)

(PS: The earlier Leg Fillers and Addon Parts for Ectotron are available here – https://www.patreon.com/posts/45103311)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon – https://www.patreon.com/FunbieStudios | Full listing of Models – https://funbiestudios.com/model-catalog

This article was first featured at https://cults3d.com/en/3d-model/game/proton-beam-effect-parts-for-transformers-x-ghostbusters-ectotron on January 4, 2021 at 10:19PM by

John Jason Fallows

See author's posts