Share this:
These are all the parts I have currently installed on my modified Tevo Tarantula. I allready uploaded a few parts during the last years and decided to put all the upgrades in one place.
All parts that have the word “plate” in the file name are cut on my MPCNC from 4mm Delrin sheets. I bet they can be printed as well.
Some parts need to be printed with support materiel (e.g. front and rear Y axis spacer), other parts are designed to be printed without support. Sometimes holes are tear drop shaped. Make sure the tip of the tear drop points up while printing.
The clearance between the X axis and the tip of the nozzle is very small. I designed an extruder that uses BondTech BMG extruder parts but is inverted to lower the mounting point for the E3D V6 heat sink. This part should be printed with PETG or a fibre reinforced plastic since the PLA will creep over time. (Lowered extruder: https://www.thingiverse.com/thing:4415357)
This article was first featured at https://www.thingiverse.com/thing:4560363 on August 3, 2020 at 09:34AM by Quadropus
More Stories
Can this possibly be true? “Metal 3D printing is now possible on any 3D printer…with the right settings and a few minor upgrades like a hardened steel nozzle…” – July 2 2023 at 04:59PM
New NASA Funding Ignites 25 3D Printing Projects in Space Exploration – June 18 2023 at 04:34PM
Nvidia AI produces 3D models from 2D videos 3D printing applications forthcoming? – June 15 2023 at 02:55AM