M-Kriss for MK23

0

0

Hello,

Here is my new project the M-Kriss for MK23 stti .

Prohibited for sale under penalty of criminal prosecution. I freely share my work as a passionate person.

-It can accommodate an extra magazine.

-Hold the replica with both hands for stability.

Later I will add a version with 2 Picatinny rails on the sides and a silencer.

Provide a 6mm diameter bolt cut at about 24mm with the head to screw it into the mk23’s trigger guard.

Printed version in PLA and 20% fill.

To print it, place the rail on the tray.

Activate the media .

Adjust as required by filing the charger’s locking wedge .

You can join me in my group dedicated to 3D printing for airsoft: https://www.facebook.com/groups/717869581740873/?ref=bookmarks

Don’t forget the “LIKE” thank you.

Hello,

Here is my new project the M-Kriss for MK23 stti.

Prohibited for sale under penalty of criminal prosecution. I share my passionate work for free.

-You can accommodate an additional charger.

-We can hold the replica with 2 hands for more stability.

Later I will add a version with 2 Picatinny rails on the sides and a silencer.

Provide a 6 mm diameter bolt cut approximately 24mm with the head in order to screw it into the trigger guard of the mk23.

Printed version in PLA and 20% filling.

To print it, place the rail on the tray.

Activate the supports.

Adjust to your liking by filing the charger block.

You can join me in my group dedicated to 3D printing for airsoft: https://www.facebook.com/groups/717869581740873/?ref=bookmarks

Don’t forget the “LIKE” thank you.

This article was first featured at https://cults3d.com/en/3d-model/home/m-kriss-for-mk23 on July 15, 2020 at 11:58AM by

John Jason Fallows

See author's posts