CM700 Upgrade

0

0

Hello,

I made some improvements on my CM 700 M40A5 that I wanted to share.

Prohibited for sale under penalty of criminal prosecution. I freely share my work as a passionate person.

• A fake charger

• A silencer cut in 2 parts, one that will hide 10 cm of barrel and the other that you can stuff with foam washers.

• I modified the Hop-up system by installing a support leg and drilled the barrel to install a TDC that I found on https://ift.tt/2DM8EzR.

I have much better performance on distance and accuracy…

Note that I printed the silencer fitting at 100% fill.

You can join me in my group dedicated to 3D printing for airsoft :

https://www.facebook.com/groups/717869581740873/?ref=bookmarks

Don’t forget the “LIKE” thank you.

Hello,

I made some improvements on my CM 700 M40A5 which I wanted to share.

Prohibited for sale under penalty of criminal prosecution. I share my passionate work for free.

• A fake charge

• A silencer cut into 2 parts, one that will hide 10 cm of barrel and the other that you can stuff with foam rings.

• I modified the Hop-up system by installing a support leg and pierced the barrel to install a TDC that I found on https://ift.tt/2DM8EzR

I have much better performance over distance and accuracy …

You can join me in my group dedicated to 3D printing for airsoft:

https://www.facebook.com/groups/717869581740873/?ref=bookmarks

Don’t forget the “LIKE” thank you.

This article was first featured at https://cults3d.com/en/3d-model/various/amelioration-cm700 on July 15, 2020 at 11:58AM by

John Jason Fallows

See author's posts