3D Printing

Mini Golf Hole 4

This is the 4th hole of my 3D Mini Golf Course.

As the collection is increasing I thought I had to increase the dificulty too. The first three holes were pretty easy since you barely needed to aim or measure the force you use to complete the hole. Well that won’t work here, Hole 4 will require precision and a good use of your strength. Be prepared to try and try again until you get the skills to complete this hole.

Let me know in a scale from 1 to 10 how hard did you find it, good luck 3D golfers !!

If you like the design please leave a like and if you have any problem with the design, printing settings, etc. feel free to leave a comment or send me a DM. Thanks for your help.

Printing tips:

1) The most important advice I can give you is to let the “teebox” cool down correctly when you print it. The part contains a spiral spring and if you don’t let it cool the spring won’t work.

2) NO SUPPORTS, with 0,2 layer height and 10-20% infill (you can also use other settings, those are the ones I used and they worked fine). It should take between 8-10h to print.

3) PLA not PET, there are a lot of overhangs in the designs so I don’t recommend using PET.

This article was first featured at https://cults3d.com/en/3d-model/game/mini-golf-hole-4 on July 14, 2020 at 07:33AM by