Ender 3 Front case for BTT SKR v1.3 + RPI3 for running Octopring / Klipper

I’ve searched for cases to accommodate RPI3 ans SKR v1.3 on the front replacing the stock electronics case without luck…so I’ve designed my own. Hope it will be useful for someone.

Read all info / instructions, some tools and other bits are needed for successful installation

Print orientation & Materials

All parts oriented correctly for printing, base and lid will take 4-6 hours to print each.

Recommended materials:

1. PLA+.
2. PETG.

Hardware specs:

1. Designed specifically for BTT SKR 1.3
2. Stepper drivers TMC2208 or TMC2209 .(Both options will run in UART mode)
3. Raspberry PI 3B
4. 4010 fans, x2 needed. (I run them in series – at 12V for quiter operation)
5. LM2596 voltage stabilizer – used for provide 5V for RaspberryPI.

Bits needed

1. M3 Button head screws kit
2. M3 nuts, stadard DIN934.
3. M3 tap for making threads.

Revisions Tracking

15.04.2020 – Initial release.

Will be happy to modify or adjust if someone needs something else.

Happy 3d printing.