Terraforming Mars 3d tiles storage

09.04.2020 Add a version for Anycubic i3 mega (max 210x210mm)

after a print test by Haudi, this version seems to be able to store the same amount of tiles per raw. (the 6mm has been gain on wall thickness and also on gap between tiles (from 4mm to 3.82mm)

version of 210x210mm:

-TM_3Dtiles_210x210_magnet8_storage.stl

-TM_3Dtiles_210x210_magnet8_lid_blank.stl

31.03.2020

if you want to test the tile slot to validate if it’s fit with your tiles:

• print_sample_for_tiles_validation.stl

different version now:

for people with a max printing size of 210x216mm:

• TM_3Dtiles_210x216_magnet8_storage.stl
• TM_3Dtiles_210x216_magnet8_storage_lid.stl

a square version of 216x216mm:

with 8mm magnet:

• TM_3Dtiles_210x216_magnet8_storage.stl
• TM_3Dtiles_210x216_magnet8_storage_lid.stl

with 10mm magnet:

• TM_3Dtiles_210x216_magnet10_storage.stl
• TM_3Dtiles_210x216_magnet10_storage_lid.stl

29.03.2020

here is a storage I made to store the (amazing) 3d tiles from Rifraf (https://www.thingiverse.com/thing:3153866)

two of them you will be able to store the full set (Base / Prelude / Colonies / Venus Next / Turmoil)

this storage is stackable and are held together thanks to 8mmx2mm neodymium magnet.

2 sockets allow to store the tile that could not sit vertically

ongoing:

I will try to use the same storage size in order to store the 3d board:
https://www.thingiverse.com/thing:3910734