Sapphire S – E3Dv6 Mount with 5015 Fanduct

E3Dv6 Mount for the Two Trees Sapphire S

The air flow has been CFD optimized ensuring equal air distribution into three areas: before, below and behind the nozzle.

The part cooling duct should be positioned 1-2 mm higher than nozzle end. The height can be adjusted in 1mm steps.

Printing:

Clip – for the best strength print clip in original horizontal orientation – requires support.

Fanduct – print flat, no supports

Link – print flat, no supports

Material: PET-G or ABS

Layer height: 0.15-0.2 mm

Parts:

1 x 5015 fan blower

2 x M3 20 mm bolt

2 x M3 7-10 mm bolt

1 x M3 30 mm bolt or 2x zip ties

5 x M3 nut