Share this:
22mm CONNECTOR with PRESSURE SENSOR ADAPTER
Design to be mounted on the line connecting the ventilator and the patient.
Require a 13mm rubber plug – design space for plug is 12mm – it will require that plug is forced on position.
All parts can be 3d printed.
All parts are design to be printed without support.
All parts are in right position to be printed.
Strongly recommend printing at 100% infill!
If you can print with elastic filament, a PLUG was add to the parts.
Recommend using a PUNCH HOLES cutter 13mm in order to cut the parts from a 10mm rubber sheet. Make central ole base on yous sensor cables.
This design was not tested and was not medical approved. Use it as a last resort!
Be Safe! Stay Safe!
This article was first featured at https://ift.tt/2XomrEl on April 10, 2020 at 04:48AM by Costa_D
More Stories
Can this possibly be true? “Metal 3D printing is now possible on any 3D printer…with the right settings and a few minor upgrades like a hardened steel nozzle…” – July 2 2023 at 04:59PM
New NASA Funding Ignites 25 3D Printing Projects in Space Exploration – June 18 2023 at 04:34PM
Nvidia AI produces 3D models from 2D videos 3D printing applications forthcoming? – June 15 2023 at 02:55AM