Custom Canopy for 4″ and 5″ (ET5) TWIG. (Multiple versions)

Custom Canopy for my ET5 build. I made it to better protect my Caddx Ratel camera than the original frame. But should work with smaller lens size camera (like Foxeer Razor). But I don’t have one so I can’t test it.

You can mount various type of Antenna (Linear, UXXI, AXXI) The short AXXI antenna should stick at the base of the hole.

The 3D model come with integrated support for printing. It allow a better finish on the edges. They are really easy to cut because the contact point are very thin. (I never achieve good result with CURA support).

Please comment if there is any problems.

Curently working on a Caddx Vista Version.

Can be use with my RX/VTX mounting solution https://www.thingiverse.com/thing:4270129

Come in 4 variations.

1 – Long Turttle Mode Fine with incorporated RX Antenna

2 – Short Turttle Mode Fine with incorporated RX Antenna

3 – Long Turttle Mode Fine (Allow 3mm tube installation for RC antenna)

4 – Short Turttle Mode Fine (Allow 3mm tube installation for RC antenna)