Share this:
3D Printer Resin Parts UV Light Curing Table
170mm wide Smaller size of Urzas_creations “Rotating Platform: Arduino meets 3D Printing | Stepper Motor 28BYJ-48 + ULN2003” https://www.thingiverse.com/thing:4094599/comments.
Added Screws to hold top on
Pot Speed Control using Robojax ecellent code “Control Speed of Stepper Motor 28BYJ-48 with potentiometer – Robojax” https://robojax.com/learn/arduino/?vid=robojax_stepper_28BYJ-48_pot_speed.
Soon as I get the schematic done I will post here.
At power on a output is turned on ( Mini 1/8 Audio Aux mount) Optional (It turns my UV light on and off) Turn Table starts and runs 15 minutes ( Changeable in the code)
after 15 minutes table stops, Output turns off to Mini 1/8 Audio Aux mount
A buzzer sounds for 60 seconds ( Changeable in the code) Then program is ended.
Optional for safety you can wire and use the push button to activate a relay that self latches to hold power to run everything. after buzzer ends it will release the relay.
Parts Used: This list is just a list. I get nothing from these links, Search for better deals.
Arduino Nano 3.0
Mini Rocker Switch 117S 2-Pin 250V/3A 125V/6A ON-OFF Panel Mount Black
Panel Cutout Dimensions: 13.5mm x 9mm (0.53″ x 0.35″)
https://www.ebay.com/itm/192728438418
10K OHM Linear Taper Rotary Potentiometers B10K POT with Black Knobs
5V Small Stepper Motor 5mm Shaft 0.0879 deg/step and ULN2003 Driver 35g 28BYJ-48
5V Single 1 Channel Relay Module Board Shield For Arduino (Optional Saftey Relay)
RED small N/O Momentary 12mm push button Switch (Optional Saftey Relay)
3.5mm Female Stereo Audio Jack
Female DC Power Jack Plug 5.5 x 2.1mm Panel Mount
608-2RS Ball Bearing 8x22x7
Power Supply Adapter AC to12V Volt DC 2.1mmx5.5mm tip
Black Mini Micro Cross Phillips Head Self Tapping Wood Screw M3 x6mm
This article was first featured at https://ift.tt/3e0Wroi on April 6, 2020 at 05:11AM by carl1961
More Stories
Can this possibly be true? “Metal 3D printing is now possible on any 3D printer…with the right settings and a few minor upgrades like a hardened steel nozzle…” – July 2 2023 at 04:59PM
New NASA Funding Ignites 25 3D Printing Projects in Space Exploration – June 18 2023 at 04:34PM
Nvidia AI produces 3D models from 2D videos 3D printing applications forthcoming? – June 15 2023 at 02:55AM