Toy truck base

Fully printable – no support – no glue – single color 3D printer

This is a truck base/platform, remixes for it on https://www.cgtrader.com/sasha19md

Only the truck base/platform is contained in this thing, the tank parts are not includes!

The tolerance for pieces that need to fit tightly is 0.1mm, for pieces that need to allow movement (like screws and axles) 0.3mm or more.

Example assemble video tutorial here: https://youtu.be/0nlt57LlyOc

Printing list: Nb. STL file name rezolution support colour (my make)

1x axle_back.stl 0.16mm no gray 
1x axle_front.stl 0.16mm no gray 
1x backhead_07.stl 0.16mm no black-orange 
0x back_light.stl 0.16mm no 
2x back_light_with_flat_cut.stl 0.16mm no orange 
1x back_light_with_flat_cut.stl 0.16mm no red 
1x back_light_with_flat_cut.stl 0.16mm no white 
1x base_semitruck_short_left.stl 0.16mm no gray 
1x base_semitruck_short_right.stl 0.16mm no gray 
1x cabin_cap.stl 0.16mm no blue 
1x cabin_with_support.stl 0.16mm no orange 
0x cabin_your_own_support.stl 0.16mm yes 
2x cap_double_rim.stl 0.16mm no gray 
2x cap_single_rim.stl 0.16mm no gray 
1x connector_simple_wheel_house.stl 0.16mm no orange 
1x exhaust.stl 0.16mm no black 
1x front_grill_07.stl 0.16mm no orange-black-orange 
1x front_lights.stl 0.12mm no orange-white 
1x interieur.stl 0.16mm no gray 
1x interieur_base.stl 0.16mm no red 
2x rim_double.stl 0.16mm no white 
2x rim_single.stl 0.16mm no white 
1x screw_gear_knob.stl 0.16mm no black 
14x screw_l6mm.stl 0.16mm no blue 
15x screw_l9mm.stl 0.16mm no black 
4x screw_l13mm.stl 0.16mm no orange 
0x sleeping_screw_l9mm.stl 0.16mm no 
0x sleeping_screw_l13mm.stl 0.16mm no 
1x steering_wheel.stl 0.16mm no black 
4x tire_outter_cut.stl 0.16mm no black(TPU) 
2x tire_simple.stl 0.16mm no black(TPU) 
1x wheel_house_front_left.stl 0.16mm no gray 
1x wheel_house_front_right.stl 0.16mm no gray 
1x wheel_house_simple_left.stl 0.16mm no gray 
1x wheel_house_simple_right.stl 0.16mm no gray

Observations:

all objects already have the intended print direction in the STL files! 
if you don't like the built in supports for the cabin, then you can find only the cabin in cabin_your_own_support.stl 
most of the parts were printed with PLA. only the tires and the mirrors were printed from TPU (flexible material) 
screws... there are also sleeping screws STLs included, these are printed on the side which makes them a lot stronger the drawback is that these don't close the holes completely... So use as many sleeping screws as you can if the toy is going to be played with, and only normal/round ones otherwise

Fire truck based on it in work…