Pushrod Clip

In 3d printed RC planes from 3Dlabprint control arms are relatively thick (about 4-6mm).

I didn’t want to use z-bend pushrods, so i decided to design pushrod clips.

The clips are intended for a pushrod with a diameter of 1 and 1.2 mm

Print settings (very important!)

Print from PETG

In high temperature (min 235oC)

Without cooling of printed elements.

Slow speed (30 – 40 mm/s)

Print at least 10 clips at a time

After printing, be prepared for long postprocessing with a sharp knife and drills

My other designs for 3dlabpint p-38:

Motor mount: https://www.thingiverse.com/thing:4078761

Wheels: https://www.thingiverse.com/thing:4078785

Spinners: https://www.thingiverse.com/thing:4078812

ESC mount: https://www.thingiverse.com/thing:4175154