Share this:
Supports or rafts: This part does not need supports or rafts. The last layers of the object have been designed as a bridge and not as a dome. Also, the bridge is inside and therefore there is no point to waste material.
Perimeters: Three lines perimeter.
Layer Height:Low layer height, i.e. 0.1 mm. It affects mostly the last layers, which is the bottom of the model. A higher layer can be used, but it will not make a nice bottom surface (or top during 3D printing). However, because the object is placed upside down, you will not be able to notice this detail. Otherwise, use a high layer for most of the part and at the end of the object use 0.1 mm.
Printing speed: High printing speed, with low to medium gap speed. However, the high speed can ruin the object’s surface due to the vibrations.
Travel speed: High.
The white pot of the picture has been printed with simple PLA and the other two with a carbon filament
This article was first featured at https://ift.tt/2uCRFvp on February 11, 2020 at 07:49AM by Horizon_lab
More Stories
Can this possibly be true? “Metal 3D printing is now possible on any 3D printer…with the right settings and a few minor upgrades like a hardened steel nozzle…” – July 2 2023 at 04:59PM
New NASA Funding Ignites 25 3D Printing Projects in Space Exploration – June 18 2023 at 04:34PM
Nvidia AI produces 3D models from 2D videos 3D printing applications forthcoming? – June 15 2023 at 02:55AM