Coreception_Elf_E3D_V6_Hotend

This hotend assembly is designed to encase the cold block and direct the air away from the build plate to aid in printing ABS. If printing in ABS it’s best to adjust the horizontal expansion.

The parts print best as layed out when files are opened, front and back housing with supports everywhere and 70 degree selected, 3 walls and 40% infill.

The parts cooling piece should be printed with supports touching build plate, 70 degrees, 3 walls and 40% infill it does print fine with FDM printers but i did ended up printing it with a SLA printer as shown in the pictures for a smoother finish .

The knurled nut inserts should be able to be super glued in place.

Parts:

1- E3D V6 hotend or clone

1- 24 volt 30x30x10mm fan

1- 24 volt 5015 blower (high speed)

Fasteners:

Back housing-

2- M3x6mm pan head screw

Front housing-

2- M3x15mm pan or socket head screw

2- M3x40mm pan or socket head screw

2- M3x3mm knurled nut insert

Parts cooling fan-

1- M3x30mm pan or socket head screw

1- M3x35mm pan or socket head screw

2- M3x3mm knurled nut insert

2- 3mm flat washers

30mm fan-

4- M3x15 pan head sheet metal screw