MP Select Mini V2 X-56 Tablet Holder

Printed on Monoprice MP Select Mini 3D Printer V2 120mm x 120mm

Using Cura 4.4.1 Default PLA on fine settings with a brim.

Materials settings, Print temp 205, Bed temp 50 to use with esun PLA+ Black

As a newbie printer re-designer still learning best practice for strength, used these setting when making mine. It’s a long print time.

Infill for the Tablet Bottom 40% using infill pattern Gyroid

Infill for the Tablet Top 22% using infill pattern Gyroid

(your choices may vary for both)

I did have issues with supports leaving marks you may come up with a better solution

The Tablet Top has a guide to line up the Bottom and glue, using Gorilla super glue gel

I’m using a previous version, with my 10in tablet for a few days now, (without the guide) after gluing the two parts together is strong, no problems thus far

NOTE:

There seems to be an issue with the original design around the circular base I added another layer to reinforce it You can see it in the Tablet Bottom image but in printing is unnoticeable.

As am still learning TinkerCab best I could do for now.