7 Wonders + Expansions + Bonuses Insert – Ready To Play – Sleeved (2 boxes)

Hi everyone !

It’s my third time posting a game insert I designed, so please be indulgent.

I didn’t found a 7 Wonders insert that fill all the expansion and bonuses sleeved in one box. Indeed, it doesn’t seems feasible, but I didn’t found one that fit everything in 2 boxes either, so I decided to design one. I’m trying to design all the insert I make to be both ready to play and sleeved cards friendly.

This insert will fit the following:

• 7 wonders
• All the expansions up to and including Armada
• All the special wonders (Wonders pack, Art pack, Catan, Siracusa)
• All the bonuses cards (Leaders Anniversary Pack, Cities Anniversary Pack, Bonus leaders and Bonus palaces)
• Official (and maybe unofficial) metal coins

All the cards, wonders board as well as the big Babel cards fits sleeved.

Wonders boards, big Babel cars and Armada player boards are stored inside the Armada Box, but it should be feasible to store them inside the Babel box or inside the Core box (by adding ~4cm to the box top). However I don’t have such time, but feel free to post a remix.

Everything else fit in the Core Box. Overall, it may add between 1~5mm to each box depending on your printer accuracy.

The only default is that the holes in the coin box top are too large, and coin may pass. Once in the box, everything stay in place, the coin box top may even be optional, but if it bother you, it should be an easy fix.

You should be able to print everything in a 210x210x205 build volume. I splitted some parts to be able to do so, then glued them using a 3D pen. However, If you have a 300×300 bed, it’s obviously better.

You will need to print:

• 1 VanillaCardsStorage.stl
• 1 ExpansionsAndRulesCardsStorage.stl
• 1 TokenTray1.stl
• 1 TokenTray2.stl
• 1 CoinTray.stl
• 1 CoinTrayTop.stl
• 1 ArmadaShipTray.stl
• 1 BabelTilesStorage.stl

If you have at least a 300×300 bed, you will also need to print :

• 1 RulesAndBabelBoard.stl (Optional)
• 1 ArmadaPlayerBoardsAndBabelBigCardsStorage.stl
• 1 WondersStorage.stl

Otherwise, you will need to print and glue:

• 4 RulesAndBabelBoardSplitted.stl (Optional)
• 1 ArmadaPlayerBoardsAndBabelBigCardsStorage_Splitted_A.stl
• 1 ArmadaPlayerBoardsAndBabelBigCardsStorage_Splitted_B.stl
• 1 WondersStorage_Splitted_A.stl
• 1 WondersStorage_Splitted_B.stl

Print them facing up, print with the open part facing up (I don’t know why, Fusion 360 tend to export my file in a bad position). This insert is designed to be a perfect fit, please check you printer accuracy is good before printing it.

Hope you like it and don’t hesitate to post your makes !

PS :

Here is the sleeves I used for the cards (those are affiliate links) :

• Amazon.fr
• Amazon.de

Those sleeves should also works (this is an affiliate link) :

• Amazon.com

Here is the special sleeves I used for the babel cards as well as the wonders boards (those are NOT affiliate links) :

• Wonder Boards
• Babel Cards

Please consider leaving a tip or using my affiliate links, the earned money will be used to buy PLA for the futures insert prototypes I will design 🙂